>Engineering & Design
UNIQUE KNOW-HOW THROUGHOUT EUROPE

The area of Engineering & Design represents the logical further development of

our product portfolio. After all, NAYAK’s goal is to provide customer service that can handle even very individualized requirements. Since June 2004, NAYAK has been licensed as a national development operation under EASA Part 21. By employing special engineers and designers, NAYAK can provide solutions to individual problems. Once approved by the official agencies, these design changes may be reproduced at any time. Because of the continuous issuance of new regulations

and the growing influence by EASA at the European level, the engineering and development organization will become much more important in the coming years. With service from NAYAK, you can face these challenges of the future a little more relaxed.

 

 

Validated STC´s

Nayak Project No.

Description

LBA / EASA No.

ELT-NY-XXXX

Installation of Artex ME406 ELT; Kannad 406 AF-compact; Ameri-King AK451 ELT in all conventional Aircraft up to 5,7t (minor Change)

various

GTX-NY-XXXX

Installation of Garmin GTX 328/330 in most conventional small aircraft (minor Change)

various

SA226/227-NY-0801

Installation of C406-2 ELT in Fairchild Sa 226/227 Series

EMZ SA 1331 / 213-02-008

SA226/227-NY-1002

Installation of TCAS II / Mode-S in Fairchild Sa 226/227 Series

EMZ SA 1390 / EASA. 2004-5755

SA226/227-NY-0303

Installation of Mode-S in Fairchild Sa 226/227 Series

EASA. A.S. 00332

SA226/227-NY-0604

Installation of Garmin Mode-S Transponder in Fairchild Sa 226/227 Series

EASA. A.S. 00639R1

M20-NY-0706

Installation of KT 73 Mode-S Transponder in Money M20

EMZ SA 1412 / EASA. A.S. 00332

RC114-NY-0707

Installation of KT 73 Mode-S Transponder in Rockwell Commander 114

EMZ SA 1417 / EASA. 2004-11566 R1

SA226/227-NY-0212

Installation of Thommen Air Data Display and Altimeter in SA 226/227 Series AC

EASA. A.S. 01187

C441-NY-0124

Installation of GTX 330D Dual Mode S Transponder in Cessna C441 Series

EASA. A.S. 02471

H800-NY-0125

Installation of Wing mounted Xenon Taxi/Landing Lights in Raytheon Hawker 800A/B; 800XP; BAe 125-800A/B; 1000; 850XP

EASA. A.S. 02489

H800-NY-0126

Installation of Iridium Satcom C-1000A in Raytheon Hawker 800 / 800XP / BAe 125-800 Series Aicraft

EASA. A.S. 02490

BE200/300-NY-0733

Installation of Xenon Nose Gear Lights in Beech 200/300/1900 Series

EASA. A.S. 02739

SA226/227-NY-0808

Installation of Honeywell EGPWS MK VI (TAWS) in Fairchild SA 226/227 Series

EASA.A.S.03251

RJ85-NY-0427

Installation of RAAS compatible EGPWS Computer in Avro 146 RJ-85/100 Series Aircraft

EASA.A.S.02624

RJ85-NY-0428

RAAS enabling in EGPWS Computer for Avro 146 RJ-85/100 Series Aircraft

EASA.A.S.02613

CRJ-NY-0429

Installation of RAAS compatible EGPWS Computer in CRJ 100/200/700/900 Series Aircraft

EASA.A.S.02612

CRJ-NY-0432

RAAS enabling in EGPWS Computer for CRJ 100/200/700/900 Series Aircraft

EASA.A.S.02625

C172-NY-0460

Installation of KT 73 Mode-S Transponder in Cessna 172 Series

EASA.A.A.01547

SA226-NY-0967

Installation of Avidyne EX500 MFD in SA226/227 Series

EASA.A.A01655

B35-NY-1275

Installation of KT 73 Mode-S Transponder in Beech 35 Series

EASA.A.A.01721

S340-NY-07113

Installation of MST 67A Mode-S Transponder and PS-578A Control in Saab 340 Series

EASA.A.A.01893

PA34-NY-10118

Installation of Garmin 530WAAS COM/NAV/GPS System in PA34 Series Aircraft

EASA.A.S.03710

GNS430-NY-05131

Installation of GNS 430 WAAS and Course Indicator KI-209A or GI 106 A GPS/NAV/COM

10027566

EX500-NY-08140

Installation of Avidyne EX500 MFD in Cessna 172 Series

10030191

KX165-NY-11147

Installation of KX165 NAV/COMM System in Piper PA 28 Series

10030131

WX500-NY-01148

Installation of Stormscope WX500 in Cessna 172 Series

10028793

ATR72-NY-02155

Installation of High Frequency Radio System HF-9000 in ATR 72 Series

10030066

FURTHER PROJECTS ON REQUEST

 

 

Continuous changes in legal requirements require prompt action. To make sure your flexibility and reliability are not left behind, our Engineering and Design Team is available at all times to provide individual developments.

 

Günther Busch, Base Maintenance Director